MGC Coal Mine Wagon

High Qaulity Reliable MA Certificated

MGC Coal Mine Wagon

INTRODUCTION

MGC1.7-9DFixed mine wagon is a transportation tool for moving coal, ore, waste rock and material in the process of mining, dragged by a locomotive or winch. Its basic components are carriage, wagon frame, buffer device, coupling and travel mechanism.

MGC Coal Mine Wagon

WORKING PRINCIPLE

MGC Coal Mine Wagon

MGC Coal Mine Wagon carriage and frame joined, flipped with a dumper to unload. Frame can withstand the traction and braking force, reduce impact. Bumpers mounted on both ends of the frame in order to ease the impact between the two cars. Join is a join of locomotive and wagon, commonly used implant links and rotating chain, high capacity mine wagon using automatic couplers that combination of buffer. Travel mechanism is made up of 4 wheels and 2 axes of the two wheel sets.

Application

Fixed mine cars are suitable for surface and underground of the mine to transport the ore and other waster material.We also supply other mine cars such as side dump mine car, bucket-tipping car, flat mine car and so on.

Features

Made by high quality steel
High stress area welds eliminated.
Mass and section thickness optimized
Long service time
Simplified state of the art mainframe and easy to operate.

Parameters

Model	Capacity (m³)	Payload (t)	Track (mm)	Wheelbase (mm)	Wheel dia (mm)	Loading height (mm)	Loading (KN)	Overall weight (kg)	Overal dimesion (mm)	Spring damper
MGC1.1-6A	1.1	1.8	600	550	300	320	60	≤610	20008801150	single
MGC1.1-6B	1.1	1.8	600	550	300	320	60	≤610	20008801150	two

Coal Mine Wagon

STRUCTURE

Using mine gate or loader for loading. In the 1970 of the 20th century, China has developed bucket reproduced train, made up of dump, lifting form and a series of coal mine cars. The dump after full loading, unloading to each coal mine car carriages by the lifting form along the tramway. This method improves the speed of handling, realize the continuous loading of coal mine wagon. Bucket load wagon has simple structure, small turning radius, can be modified by standard coal mine car. Mine car wheel rim on the inside, there is a gap between the wheel flanges and Rails.

Coal mine wagon and the sum of more than 20 tons of materials, should increase the number of wheels.

For more coal mine wagon than has more than two wheel sets, in order to through curve track, compose two wheel sets to form a bogies which is an vehicle equipped with a turntable.

Assembling Requirements

Before assembling,all the parts should be inspection qualified.

All parts should be clean, and assembly in a clean environment.

MGC coal mine wagon overall width and tracktion height error should be ±3mm, height error should be ±8mm, overall length is ±10mm.

Wagon carriage installed symmetrically to the longitudinal centre plane of the frame, the symmetry tolerance to 5mm.

Assembled mine car should be placed in a special straight road to check, and does not allow a clearance between wheel and rail is greater than 2mm.

Coal Mine Wagon should inventory of rust, runs smoothly in the corners and straight.

The parts covered with phenolic resin primer, body painting according to the contract, appearance even, neat, shade of the paint, covering the complete, no brush marks from the skin, accumulation and defects such as bubbles.

To check the adhesion, coating edges or lattices cutting cross-section without falling off or shedding, shedding surface area not greater than 15%.

Coal Mine Wagon

Installation and Maintenance

Prepare

1.1 Prepare tools and spare parts,inspect lifting equipment.
1.2 On-site inspections of good standard item-by-item.
1.3 Check if the wheel rotation is flexible.
1.4 Maintenance the abnormal mine car at a safety place.

Test Run

Observe if the mine car wheel is rubbing with the track, repair in time to prevent damage to harvesters.

Observe if the wagon body is tilted, orbit or tipping over after bumping into another car alone the sloping curve.

Observe the runing codition on the minimum radius of curvature of the track.

Installation Notes

Within six months from the received date, mine car damaged or not working properly due to poor manufacturing quality, supplier shall repair or replace for free. Coal Mine Wagon Mine car should be without serious damage, wheels should be flexible, non-blocking. Coal Mine Wagon Normal life over 10500h, generally do not require maintenance.Establish appropriate maintenance,replce the abnormal noise and not turning wheel.

Product Feedback

Average Star Rating:

History Feedback: (6)

Latest Feedback

Contacts:M***s E-mail:M***s @w***n.com

Commend: Could you send me product catalogs with more details for reference?

Customer Services: Thanks for your support to us! And our sales will contact you soon!
Contacts:J***y E-mail:J***ycl

Commend: I really like to cooperate with your company, certifications are complete, the product rest assured

Customer Services: Thank you for your recognition and evaluation of China Coal, we will as always, provide new and old customers with quality products and services!
Contacts:T***a E-mail:T***a @s***a.sk

Commend: Want to cooperate with your company, please get back to us

Customer Services: Dear Customer, We clarify as soon as possible your request and will contact you shortly. China Coal Group