- Kneader series
- Grinding and Dispersing series
- Mixing and kneading series
- Pressure Vessel Series
- Dry powder mixer series
- High viscosity mixing series
- Stirring and dispersing series
- Emulsifying homogeneous series
- Grinding series
- Filter series
- Large storage and pressure vessel series
- Boiler&Heat-conducting oil furnace series-4
- Centrifuge machine
- Chemical plant production line
- Mine Car & Wheel Set
- Mine Locomotive
- Mining Man Car
- Diesel Locomotives
- Muck Shovel Loader
- Mucking Machine
- Rock Loader
- Scraper Conveyer
- Belt Conveyor
- Air Compressor
- Ventilation Equipment
- Roadheader Machine
- Mining LHD
- Coal Shearer
- Mine Car Dumper
- Mining Electric Appliance
- Mine Communication
- Gas Drainage Pumping Station
- Rail Catcher
- UNI-T UTi165K Infrared Thermal Imaging Camera Digital Imagining Camera
- UNI-T UTi85H+ Infrared Thermal Imaging Digital Camera
- Dynamic Face Recognition and Thermometry Terminal
- Non-Contact Infrared Thermometer
- Face recognition body temperature detector
- Non Contact Infrared Thermometer
- Body temperature scanner with disinfection machine in public place
- Face recognition temperature measurement and disinfection machine
- Steel Rail
- Track Switch
- Rail Transit Equipment
- Rail Transit Equipment
- Rail Arrester
- Seamless Steel Pipe
- Railway Sleepers
- Railway Parts
- Mining Steel
- Steel Plate & Steel Sheet
- Steel Shot
- U Channel Steel Support
- Hydraulic Acrow Props
- Hydraulic Roof Supports
- Hinged Bar
- Anchor Bolt
- Anchor Agent
MPC series flat rail wagon is suitable for the underground mining, underground tunnel andindustrial site surface transportation.
Flat Rail Wagon Application
To carry loads along assembly lines; transfer material from one work station to the next; store and transport an entire shift worth of production. They can even be used as a stable yet moveable machine base.
Flat Rail Wagon Features
The frame is designed into metal structure, which can withstand the traction,the car collision between impact force and the rail.
Simple structure, durable, small resistance coefficient,large capacity, easy maintenance.
Reduces the impact of stress and increases the service life by adopting the car frame in welding structure.
Ensure operating smoothly no matter on curve or straight rail.
For Coal Mine
Loading Capacity t
eg:MPC13-6 flatbed mine car
Meaning: 13T loading capacity, 600mm guage flat rail wagon for coal mine
|Garuge G||Overall Dia||Wheel Base
of Runing Surface
|Length L||Width B||Height H|
|Note:Height H and Traction Height h measured since rail surface.|
Driven by locomotive or winch, running alone railway underground mine or tunnel, transport mining materials and equipment.
mainly consists of frame, buffer device, wheel set( open-wheel, closed-wheel, connection device, etc.
The frame fashioned iron should be straightened not be larger than 1.5 ‰ before plug weld. Two frame sides parallel degree of tolerance for the length of 2 ‰.The flatness tolerance of the flame is 2 ‰ to the frame length (buffer not included ), but the max flatness tolerance should less than 5 mm.
The center of the frame surface traction device should be symmetry to the longitudinal center plane of the frame, and its symmetry tolerance should not exceed 6mm.
Close-Wheel Set Grease, dirt, the scrap iron and blockage should be removed before attempting assembling.
Wheel should not appear crack, 10 mm in length range appeared on top of the rim and the end part of the profile of tiny crack, should not be more than two.
Surface defects such as trachoma, porosity of round hole,that the area smaller than 16 mm2, the depth is less than 3 mm, 30 mm apart or more, shall not exceed three.
Open Wheel SetConstituted by wheel,shaft,bearing,etc.Its technical conditions comply with the provisions of "JB/T6992-1993". Clean the iron and blockages, and clean the parts before front wheel assembly,bearing should assembled by no shock load method, make sure the wheel rotation flexibility.
Bumper technical conditions in accordance with JB/T6992-1993 Buffer has enough strength, cushioning material toughness value of not less than 30J/cm2,cast steel bumpers there shall be no crack, on the surface of cast steel bumper bolt hole and end face not allowed any defects and shall not carry out welding.
Connection device is composed of connection three-ring chain, bolt. Connection three-ring chain conforms with the standard requirements of" MT 244.1 - 2005 coal mine narrow gauge vehicle fittings connection chain ". Connecting pin conforms with the standard requirements of"MT 244.2-2005 mine narrow gauge vehicle connector connecting pin".
Before assembling,all the parts should be inspection qualified. All parts should be clean, and assembly in a clean environment. Assembled dimension deviation: the total width of mine material car and the high traction deviation of ± 3 mm, total high deviation of ± 8 mm, length deviation of ± 10 mm. Deviation of the length of - 10 ~ 0 mm, width deviation of plus or minus 3 mm.
Observe whether the wheels rub on the track,handle it in time to prevent damage once the phenomenon occurs.
Observe whether tilt,out of orbit or overturned after it sliding along the slope curve and colliding with another car.
Observe the runing codition on the minimum radius of curvature of the track.
Test Run, Maintance Notes
Mine car should be without serious damage, wheels should be flexible, non-blocking.
Within six months from the received date, mine car damaged or not working properly due to poor manufacturing quality, supplier shall repair or replace for free.
Bearing cage opening towards out when replacing, maintain proper clearance.
Seals should be used the original distribution.
a.Operate strictly to the rules.
b.Do not allow overloading.
c.Do not do any cleaning during working process.